47
What are the common settings for
slicing and printing parameters?
Here is our suggestion for you problem:
Please refer to the following common parameter settings
Layer height 0.15mm
Wall thickness 1.2mm
Top bottom layer thickness 1.2mm
Filling 15%~25%
Printing speed 50~60
Nozzle temperature 200~210
Hot bed 45~55
Support type (all support)
Platform attachment type (bottom grid)
Pumping back speed 80
Pumping back length 6~8mm
The rest of the parameters keep the default can
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
48
What is the difference between
partial support and all support?
Here is our suggestion for you problem:
Partial support, adding only the support between the model and the hot bed.
No support between the model and the model is added.
Therefore, we generally recommend to use all supports directly
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
49
The software does not have the
corresponding models, how do I add
them?
Here is our suggestion for you problem:
1. Open the software and find the option to add a model/printer
2. Select "Custom" and enter the size of the machine you need to add.
3. Note that the nozzle aperture column needs to be the same as the actual nozzle aperture
of the machine and check the hot bed option
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
