32
What about the power suddenly goes
out, before the model is finished
printing?
Here is our suggestion for you problem:
The machine has the function of power off and continue to print.
You can continue to print after re-powering
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
33
Does the machine have requirements
for the use environment?
Here is our suggestion for you problem:
The printer can be used at the usual room temperature.
If the ambient temperature is below 10 degrees, the hot bed temperature needs to be raised
to about 60 degrees
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
34
Is the machine noisy when working?
Here is our suggestion for you problem:
This machine uses 32-bit silent motherboard and fan.
When the machine is working as a whole, the volume generated within 0.5 meters is about 55
decibels
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
35
Can I replace the nozzle with a
different orifice?
Here is our suggestion for you problem:
The default nozzle aperture of this printer is 0.4mm.
You can replace the nozzle with other nozzles of 0.2, 0.6, 0.8, etc.
At the same time, the layer height and wall thickness inside the slicing software also
need to be modified simultaneously
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
36
Does it support printing ABS?
Here is our suggestion for you problem:
ABS has a high demand for ambient temperature.
It needs to be in a constant temperature environment when printing
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
