emz smart Econ HCW 1620, Инструкции по эксплуатации и монтажу

Страница: 31 / 154

SETTINGS DURING OPERATION
smart Econ - emz-HCW - 180116 31
Setting heating periods and temperatures
You can define up to three heating periods for each room and day of the week.
You can define a room temperature for each set period.
In between these periods, the system regulates itself to the setback temperature.
If you set the time from 00:00 to 00:00, the system will not be controlled at this time.
You can enter the times in steps of 10 minutes, the temperatures in steps of 1/10 degree.
Selecting the day of the week
The default setting is ›Monday‹ .
Select the day (shaded) with the turn knob and press the knob. The day will begin to flash.Turn the
turn knob to the left or right and press it to select a different day.
Setting times and temperatures
“Change values” on page 23
›COPY DAY...‹
With the turn knob, select ›COPY DAY...‹ (highlighted) and press the turn knob.A submenu in which
you can select the day of the week is opened.
Example: Tuesday should be the same as on Monday.
Select ›Tuesday‹, press the turn knob, ›COPY DAY...‹, press the turn knob, select ›Monday‹, press
the turn knob.
›COPY ALL VALUES...‹
With the turn knob, select ›COPY ALL VALUES...‹ (highlighted) and press the turn knob.A selection
of additional rooms is displayed.Turn the turn knob again to select a room and press to confirm and
copy all times and temperatures from this room.
HEAT CIRCUIT 1
^
COPY ALL VALUES
Monday COPY
DAY
from 06:00 - 22:00 hrs => 21 degr
from 00:00 - 00:00 hrs => 21 degr
from 00:00 - 00:01 hrs => 21 degr
economy mode => 15 degr
everything clear NO? => <INFO>!
i
BACK