WiDeFi Inc. 1333 Gateway Drive Suite 1012, Melbourne, Florida 32901
+1 321.725.1520
www.WiDeFi.com
CONFIDENTIAL
5) After 30 to 60 seconds verify the AP Status LED is solid
Green
indicating Xtender found the Access Point. Congratulations, you
successfully completed the installation and are now REPEATING
PACKETS!
Notes:
•
If the AP status LED is blinking after 60 seconds, power-up
Xtender in a new location closer to the Access Point
•
If the Link Quality LED is OFF, Xtender is too far from the
Access Point, relocate to a position closer to the Access Point
•
If the Link Quality LED is blinking, Xtender is too close to the
Access Point, relocate to a position further from the Access Point
•
Xtender performance can be maximized by setting your
Access Point channel to 1 instead of 6 or 11
Link Quality LED
Solid GREEN: Good Link!
Blinking:
Xtender is too close to the AP
Off:
Xtender is too far from the AP
AP Status LED
Solid GREEN: Access Point Found
Blinking:
AP not found
Not Used
Not Used
Link Quality
AP Status
Config
