WiDeFi Inc. 1333 Gateway Drive Suite 1012, Melbourne, Florida 32901
+1 321.725.1520
www.WiDeFi.com
CONFIDENTIAL
Desktop stand
Not Used
Not Used
Link Quality
AP Status
Config
A Wi-Fi user experiencing coverage issues can increase range and throughput of their
home network simply by installing Xtender half way between their access point and area
with coverage issues.
Once configured, Xtender extends range and throughput coverage by amplifying and
retransmits all Wi-Fi packet traffic received from the Access Points (or clients) on Channel
F1 to a different Channel F2 as shown in Figure 1. At the same time, all packets received
on F2 are amplified and re-transmitted on channel F1. A client who is located beyond the
reach of an Access Point can now reach the Access Point through the repeater.
Xtender Operation
Xtender is fully configured and operated using only one push button and two LEDs
including:
AP Status LED
and
Link Quality LED
.
LED operation is summarized in Table
1 below. The “Configuration” pushbutton is only used at initial setup to select or “Affiliate”
with the desired Access Point to be repeated.
