EMS TAM-242, Инструкция по установке и эксплуатации

Страница: 8 / 23

Introduction TAM-242/252/262 Installation and Operating Manual
This document contains information that is proprietary and confidential to EMS Global Tracking (one or more of the following: EMS Global Tracking Ltd a nd EMS Technologies
Canada, Ltd), and is supplied on the express condition that it is not to be used for any purpose other than the purpose for which it was issued, nor is it to be copied or
communicated in whole or in part, to any third party other than the recipient organization, without the prior written permiss ion of EMS Global Tracking.
2 of 17 © 2011 EMS Global Tracking Ltd, EMS Technologies Canada Ltd. MAN-0059 Issue 4
2 Chapter 2
– Introduction
What is the TAM-242?
The TAM-242 (Figure 2-1) is a compact, low data rate, satellite terminal designed to operate over the
INMARSAT satellites for use in tracking assets that have no integral power source. The terminal uses
the INMARSAT IsatM2M protocol and provides global coverage and fully automatic roaming across
al
l of the world’s ocean regions, see Location on page 6 for more information.
Figure 2-1: TAM-242 Tracking and Monitoring Equipment
TAM-242 Main Module
The TAM-242 incorporates a SAT-200 satellite modem mounted within the IP66 rated enclosure,
containing the battery compartment and interface PCB.
The TAM-242 may either be permanently fitted to the asset or temporarily deployed utilising the four
(4) magnets incorporated within the enclosure base.
Interface Connector, Key Switch, and LED
The TAM-242 has one external interface connector which is used to charge the unit and a key switch
that allows you to switch the terminal “On” and “Off”. This helps preserve the life of the battery when
the terminal is not in use. Further instructions on the use of the key switch are contained in Key
Switch Operation on page 8.