EMS TAM-242, Инструкция по установке и эксплуатации

Страница: 16 / 23

Installation TAM-242/252/262 Installation and Operating Manual
This document contains information that is proprietary and confidential to EMS Global Tracking (one or more of the following: EMS Global Tracking Ltd a nd EMS Technologies
Canada, Ltd), and is supplied on the express condition that it is not to be used for any purpose other than the purpose for which it was issued, nor is it to be copied or
communicated in whole or in part, to any third party other than the recipient organization, without the prior written permiss ion of EMS Global Tracking.
10 of 17 © 2011 EMS Global Tracking Ltd, EMS Technologies Canada Ltd. MAN-0059 Issue 4
Operational Status
The TAM-242 is a self contained unit and as such the only checks that can be made are when
charging the battery or changing the unit
’s state from on to off or vice versa. In all of these cases the
LED function is as per the following table:
Operation LED Status Duration Remarks
Normal Operation
–
Position Reporting and
“Awake” to Receive
Message
Flashing
–
Colour
indicates
charge level
One second on, two
seconds off for up to
10 minutes The colour indicates the
charge status, Green >90%,
Orange 25% to 90%, Red
<25%. Terminal will enter
Sleep Mode between
transmissions (no LED)
Switch Off with Key
Switch ON Six seconds LED will remain off until the
terminal is switched on or
charged
Switch On with Key
Switch Flashing One second on, two
seconds off for up to
10 minutes Immediately transmits a
position report
Charging ON
– Red or
Orange
Continuous There is a fault
Charging Flashing - Red Five seconds on, three
seconds off Battery charge at <90%
Charging Flashing -
Green Five seconds on, three
seconds off Battery charge at >90%
Charging ON - Green Continuous Battery full