EMS TAM-242, Инструкция по установке и эксплуатации

Страница: 17 / 23

TAM-242/252/262 Installation and Operating Manual Installation
This document contains information that is proprietary and confidential to EMS Global Tracking (one or more of the following: EMS Global Tracking Ltd and EMS Technologies
Canada, Ltd), and is supplied on the express condition that it is not to be used for any purpose other than the purpose for which it was issued, nor is it to be copied or
communicated in whole or in part, to any third party other than the recipient organization, without the prior written permission of EMS Global Tracking.
MAN-0059 Issue 4 © 2011 EMS Global Tracking Ltd, EMS Technologies Canada Ltd. 11 of 17
Troubleshooting
Non Reception of Transmissions
If the application is not receiving transmissions from the TAM-242, there may be a problem with the
system. You should:

Ensure that the TAM-242 has been activated with a valid airtime package.

Ensure that the antenna is not blocked and has a clear line of sight to the satellites. Refer to
Location on page 6.

Ensure that the TAM-242 is switched on.

Ensure that the battery is charged.
LED Always Off
If the LED does not switch on either during a normal transmission or as part of the sequence for
Switching on/off, the battery may be discharged. The LED will indicate the battery charge status
whilst the unit is plugged into the charger. If after checking the battery the fault persists you should
contact
trackingsupport@emsglobaltracking.com for further help.
LED Continuous Red or Orange
In the event the LED illuminates red or orange continuously, there is most likely a fault with the unit.
Contact
trackingsupport@emsglobaltracking.com for further help.