34846-2-1016
Page 28
2. Apply the accessory decorative media to the shaded area
only.
See Figure 44.
Use enough to cover the floor of the
fireplace, but do not allow the media to reach higher than the
flange surrounding the burner. Never place decorative media
inside the flange surrounding the burner itself.
This fireplace can use crushed glass, glass droplets (1/2
inch), glass drops (1 inch), or ceramic fiber rocks and
pebbles. Mix colors and glass types, but do not exceed the
recommended amount of decorative media.
CAUTION
Glass or rocks must not be placed around the ends or over the
front edge of the burner assembly. Do not restrict air flow.
Figure 44
Quantity of Glass
Model
Amount
VFLL38FP
1.75 sq. ft.
VFLL48FP
2.25 sq. ft.
3. Replace the glass front into the fireplace by placing the right
side into the slots in the firebox. Carefully angle in the left
side of the glass and then slide the glass to the left. Settle the
glass into the slots by gently lowering it.
See Figures 45 - 48.
Figure 48
Figure 45
Figure 46
Figure 47
DECORATIVE GLASS ACCESSORY INSTALLATION