manualshive.com logo in svg

Empire Comfort Systems DVLXB55BP90N-1, Руководство по установке, Страница: 63 / 66

Поделиться
Скачать
Empire Comfort Systems DVLXB55BP90N-1 Скачать руководство пользователя страница 63

63

HOW TO ORDER REPAIR PARTS

Parts Not Under Warranty

Order parts through your service person, or dealer. For best results, the service person or dealer should order parts through the 

distributor. Parts can be shipped directly to the service person/dealer.

Warranty Parts

Warranty parts will need a proof of purchase and can be ordered by your service person or dealer.
When ordering parts, first obtain the Model Number and Serial Number from the rating plate on your equipment. Then determine 

the Part Number from the list in this manual (not the Index Number) and the Description of each part from the illustration and part 

list. Be sure to give all this information:
Fireplace Model Number  

 

 Part Description 

    

Fireplace Serial Number  

 

 Part Number     

Type of Gas (Propane or Natural)  

      

Do not order bolts, screws, washers or nuts. These standard hardware items can be purchased at any local hardware store.
 

 

 

 

 

 

 

 

 

               

Содержание DVLXB55BP90N-1



































































Отзывы:

Нет отзывов