Empire Comfort Systems DVL36BP30 Series, Руководство по установке, Страница: 48 / 68

GLASS PLACEMENT
41978-1-1220 Page 48
SEQUENCE OF ACCESSORY INSTALLATION PRIOR TO THE
PLACING OF CRUSHED GLASS MEDIA:
• Accent Light Kit - LK10
• Porcelain Liner Kit - LND(36,46)LKR
• Log And Rock Kit - LS60THF
CAUTION
Turn off all power to the fireplace prior to changing bulbs
or servicing the controls.
CRUSHED GLASS PLACEMENT
1. Add the decorative crushed glass media at this time.
Completely cover over the burner screen.
2. Place crushed glass media over the burner screen in a
single layer. Use ONLY enough crushed glass media to
mask the burner screen. See Figure 64.
NOTICE: 1/4-inch crushed glass media is required on the
burner screen for proper operation.
CRUSHED GLASS
MEDIA REQUIRED
CAUTION:
PLACE CRUSHED
GLASS MEDIA IN THE RECESSED
AREA AROUND THE PILOT, PILOT
SENSOR, OR IGNITOR PROBE
DO NOT
CAUTION:
DO NOT PLACE CRUSHED
GLASS MEDIA IN THE RECESSED
AREA AROUND THE PILOT, PILOT
SENSOR, OR IGNITOR PROBE.
CRUSHED GLASS
MEDIA REQUIRED
Figure 64