![background image](http://html1.mh-extra.com/html/empire-comfort-systems/bfr2124rn/bfr2124rn_installation-instructions-and-owners-manual_2403831019.webp)
39246-0-0718
Page 19
REMOTE OPERATION
STANDARD HANDSET FEATURES
Figure 14:
R300 Standard
Model, Patented
Figure 15:
R300 Standard
Model Icons
LCD Icon
Features And Description
Sleep Mode Icon.
After 8 hours of no
signal between the handset and the
receiver, valve runs to pilot and
Sleep
Mode icon is displayed.
Ambient Temperature Display:
Indicates
the current room temperature. °F or °C
Child Safety Lock:
When ON (icon
showing), the right button must be pushed
twice within 0.5 seconds to increase the
flame height.
Battery Life Indicator:
4 bars indicates a
fully charged battery.
Clock Mode:
Set to 12 or 24 hour clock.
Communication Indicator:
Indicates the
handset is transmitting to the receiver.
INITIAL SETUP
SETTING THE ELECTRONIC CODE
Radio Frequency Remote
A code is selected automatically for all Mertik Maxitrol
electronics from among 65,000 random codes available.
On initial and subsequent receiver battery changes, the
receiver has to learn the code of the handset.
• Power up Handset
• Power up Receiver (LED blinks).
• While blinking, press any button.
• When the Receiver LED stops blinking, the code is set.
NOTE:
These remote handset and receiver are not
interchangeable with previous versions. For all lighting
instructions please refer to appliance manufacturer's
instructions.
APPLICATION
GV34 is a servo motor operated valve with remote control
allowing for infinite adjustment from low fire to hire fire.
GENERAL NOTES
Radio Frequency Remote
868 MHz for Europe; 915 MHz for U.S. (FCC ID:
UX5-R300) and for Canada (IC: 4943-R300).
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) This device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the
party responsible for compliance could void the user's
authority to operate the equipment.
Batteries -
Remote Handset:
2 X 1.5V "AAA"
(quality alkaline
recommended)
Batteries -
Receiver:
4 X 1.5V "AA"
(quality alkaline
recommended).
Battery
Replacement
Battery
replacement is
recommended
at the beginning
of each heating
season. Do not
use metal tools to
remove batteries.
Using a metal tool
could cause a short
that may damage
the receiver.
Location Of
Receiver
See page 14.
°F
°C
AM
PM