4. When setting temperature Hi or Lo value, press
[ ALARM ]
key to toggle the alarm
on/off of the regarding HI / LO alert.
5.
[ ALERT ]
key for 2 seconds or without pressing keys
for 60 seconds to return normal mode.
High humidity alert on
High temperature alert on
Note:
-
temperature alert value is 40°C, you cannot enter more than 39.9°C for the LO alert,
and so forth.
- When the alert is triggered, the alarm will sound and the alarm icon on the display will
[ ALARM / SNOOZE ], [ ALARM ] or [ ALERT ]
key to stop the alarm
sound. If you ignore the alarm, it will stop after 2 minutes.
- When auto-cycle mode, if any alarm is triggered the display will switch to the regarding
channel. You can press
[ ALARM / SNOOZE ], [ ALARM ] or [ ALERT ]
key or leave
the unit for 2 minutes to stop the alarm. The display will return to auto-cycle mode
afterwards.
MOON PHASE
The main unit can show the northern hemisphere moon phase status, below is the table
which illustrate how the moon will appear on the main unit
Northern hemisphere
Moon Phase
New Moon
Waxing Crescent
First quarter
Waxing Gibbous
Full Moon
Waning Gibbous
Third quarter
Waning Crescent
LOW BATTERY ICON
If the main unit or sensor is low in battery, the low battery icon “
” will display. The icon
will only appear when the corresponding channel is displayed.
For example, the sensor of
CH 1
is low in battery. When
CH 1
is displayed, the icon “
” will show.
Note:
The batteries in main unit are only for backup purpose, the battery life cannot maintain
for long time usage.
IMPORTANT NOTE
- Read and keep these instructions.
- Do not subject the unit to excessive force, shock, dust, temperature or humidity.
- Do not cover the ventilation holes with any items such as newspapers, curtains etc.
- Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a
soft, lint-free cloth.
- Do not clean the unit with abrasive or corrosive materials.
- Do not tamper with the unit’s internal components. This invalidates the warranty.
- The socket outlet shall be installed near the equipment and shall be easily accessible.
- Only use fresh batteries. Do not mix new and old batteries.
- Do not dispose old batteries as unsorted municipal waste. Collection of such waste
separately for special treatment is necessary.
- Attention! Please dispose of used unit or batteries in an ecologically safe manner.
-
change without notice.
Hereby, Emos spol. s r. o. declares that the radio equipment type ESW5002 is
in compliance with Directive 2014/53/EU. The full text of the EU declaration of
SPECIFICATIONS
MAIN UNIT
Dimensions (W x H x D)
202 x 138 x 38mm
Main power
DC 5V,
1
A adaptor
Backup battery
3 x AAA size 1.5V batteries
(Alkaline battery recommended)
Barometer range
540 to 1100hPa, 405 to 825mmHg, 15.95 to
32.49inHg
Operating temperature range
-5°C to 50°C ( 23°F to 122°F )
Humidity range
RH 1% to 99 %
Resolution of temperature
0.1°C/°F
Resolution of humidity
1%
Radio controlled signal
Received from wireless sensor
Number of sensors support
Up to 8 units
WIRELESS SENSOR
Dimensions (W x H x D)
61 x 113.6 x 39.5mm
Main power
2 x AA size 1.5V batteries
(Lithium battery recommended for low temperature
environment)
Operating temperature range
-40°C to 60°C ( -40°F to 140°F )
Operating humidity range
RH 1% to 99 %
RF frequency
433MHz
RF transmission range
30 meters
Radio controlled signal
DCF
