32
=
=
i
Counting direction : 0 --> P (Upcounting)
=
Automatic Reset-2
When count value reaches the Set Value, Output Position is changed. If
Output Pulse time is not 0, then Output Position is changed
at the end of the Pulse time and Actual value is reset and if the Start input
is active, then counting starts from 0 value. If output pulse time
is “0”, then output position has not change
until
Manual Reset
happens.
Actual counting value stops at SET value. Counting process is not
continue over the SET value.
When Manual Reset happens, count value becomes 0 value.
0
Set
Reset
Output
0
Set
Reset
Output
Start
Start
If output functions parameter is selected Automatic Reset (
, or , then must be different from zero
for realizing Automatic Reset.
