TB-6584
Page 8 of 13
© 2016 DESCO INDUSTRIES, INC.
Employee Owned
50771 Turnstile Bracket
The relay terminal featured on the SmartLog V5™ makes the
tester ideal for turnstile integration. EMIT offers the 50772
and 50773 SmartLog V5™ Turnstile as a complete access
control solution. These items include both a SmartLog
V5™ and stainless steel turnstile. Should you already own
a turnstile, use the EMIT 50771 Turnstile Bracket to mount
your SmartLog V5™ to the top of the turnstile. The bracket
has a footprint size of 6.6" x 5.5" footprint and can be fitted to
most turnstiles.
2. Install the nylon bushing into the .875" hole located
on the turnstile’s cover.
Figure 8. EMIT 50771 Turnstile Bracket, SmartLog V5™
Packaging
1 Stainless Steel Turnstile Bracket with Nylon Feet
1 Screw, 4-40 thread
3 Screws, 10-32 thread
3 Nuts, 10-32 thread
3 Washers
1 Nylon Bushing
Installation
1. The 50771 Turnstile Bracket provides a way to route
the SmartLog’s cables through the turnstile’s
enclosure in order to eliminate tampering of the
connections. Use the drill pattern in Figure 9 to mill
the top cover of your turnstile and clear space to
mount the bracket.
Typ. 120º
3X .189"
R.90"
.875"
Figure 9. Drill pattern for mounting the bracket to a
turnstile’s cover
Figure 10. Installing the nylon bushing into the turnstile
3. Open the turnstile’s cover. Install the mounting
bracket onto the turnstile’s cover using the three
10-32 screws, washers and nuts. From top to
bottom, the installation order is: screw, washer,
mounting bracket, turnstile cover, nut.
Figure 11. The bracket installed to a turnstile
4. Route the SmartLog’s foot plate cable, power
adapter, ground cord, relay wires and Ethernet cable
through the turnstile and bracket. Use an opening at
the base of the turnstile to route the foot plate cable
to the foot plate.
www.
.com
1.800.561.8187
