TB-6584
Page 12 of 13
© 2016 DESCO INDUSTRIES, INC.
Employee Owned
Operation
NOTE: The SmartLog V5™ must first be programmed
with the user ID table using the TEAM5 Software before
being deployed for employee use, or the default test
settings will be applied.
If the SmartLog V5™ is located near a restroom, sink or
other water source, operators will need to be instructed
to thoroughly dry their hands before testing. Wet hands
may cause inaccurate test results and damage to the
tester.
1. Initiate the test procedure by identifying yourself to
the SmartLog. This may be done using the keypad,
barcode badge scanner or proximity badge reader (if
supplied).
2. Follow the prompt on the SmartLog’s display.
3. When performing a footwear test, be sure to place
both feet on the dual foot plate (one foot per plate).
NOTE: Keep the foot plate clean with 99% isopropyl
alcohol when using the 1 Gigohm high test limit. A
dirty foot plate could yield a false pass.
When performing a wrist strap test, be sure to
completely plug in the wrist cord into the tester’s
jack.
4. Press and hold the metal touch plate on the tester
to perform the test. Hold your finger on the touch
plate until the results of the test are displayed.
If performing a wrist strap test, and the wrist strap
status LEDs do not illuminate, verify that the wrist
cord is correctly inserted into the tester.
5. The relay terminal will activate if the defined tests
are passed (if applicable).
Calibration
Frequency of recalibration should be based on the
critical nature of those ESD sensitive items handled
and the risk of failure for the ESD protective equipment
and materials. In general, EMIT recommends that
calibration be performed annually.
Use the EMIT 50424 Limit Comparator to perform
periodic testing (once every 6-12 months) of the
SmartLog V5™. The Limit Comparator can be used on
the shop floor within a few minutes virtually eliminating
downtime, verifying that the tester is operating within
tolerances.
Figure 22. Using the SmartLog V5™
Figure 23. EMIT 50424 Limit Comparator
www.
.com
1.800.561.8187
