EMI VPAC, Инструкция по установке, эксплуатации и обслуживанию

Страница: 3 / 16

3 Made in Rome, New York, USA
VPAC/VPHP
IMPORTANT SAFETY FEATURE
Power Cord With Integral Safety Protection
All PTACs rated 250V or less that are cord connected
to the power supply are equipped with a power cord
with integral safety protection as standard. Providing
personal shock protection as well as arcing and
fire prevention, the device is designed to sense
any damage in the line cord and disconnect power
before a fire can occur. Tested in accordance with
Underwriters Laboratories, the cord set also offers a
unique “passive” operation, meaning the unit does not
require resetting if main power is interrupted.
WARNING - A DAMAGED POWER SUPPLY CORD
MUST BE REPLACED WITH A NEW CORD FROM
THE MANUFACTURER, AND NOT REPAIRED.
Each power cord should be checked before every
use. Follow the instructions in the order listed on the
device.
WARNING - DO NOT USE THE PRODUCT IF THE
UNIT FAILS THE TEST.
TABLE OF CONTENTS
To the Installer and Safety Instructions ....................2
Warnings and Installer Responsibilities ...................3
Controls and Components ......................................4
Product Description, Air System .............................4
Heat-exchanger, Refrigeration, Electrical Wiring ....4
Insection, Installation Instructions ........................5-9
Sequence of Operation ....................................10-12
Cleaning and Maintenance ....................................12
Troubleshooting ....................................................12
Specifications and Dimensions ........................13-14
Warranty ...............................................................15
INSTALLER RESPONSIBILITIES
This manual has been prepared to acquaint you with the
installation, operation and maintenance of this VPAC/
VPHP PTAC and to provide important safety information
in these areas.
We urge you to read all of the instructions thoroughly before
attempting the installation or operation of this unit. This
manual should be kept for future reference.
The manufacturer of this unit will not be liable for any dam-
ages caused by failure to comply with the installation and
operating instructions outlined in this manual.
A rating plate identifying this VPAC/VPHP PTAC can be
found on the unit. When referring to your unit, always have
the information listed on the rating plate readily available.
MODIFICATION AND TAMPERING
!
!
DANGER
Tampering with the VPAC/VPHP is dangerous
and may result in serious injury or death. Tam-
pering voids all warranties. Do not attempt to
modify or change this unit in any way.
! !
WARNING
Completely read all instructions prior to as-
sembling, installing, operating, or repairing
this product. Inspect all parts for damage prior to
installation and start-up. The VPAC/VPHP PTAC
must be installed ONLY by qualified installation
personnel.