EM-GU User’s Manual
3. Operation and Display
7
Prompt:
●
Only when the "READY" is displayed, the motor can be started by pressing the
running key.
●
When the external control terminal is wired in 3-wire mode, the external control start and stop buttons are
functionally equivalent to the
running key and
stop/reset key on the keypad respectively.
●
During the start and stop process, you can not enter the Set Menu or Help Menu.
。
Parameter modification operation:
In the “Ready” state, press
MENU/ENTER key can enter the main menu. And the parameter can be
selected by
UP key or
DOWN key, and press
MENU/ENTER key again to enter the
parameter that needs to be modified, select the option or modify the value by
UP key or
DOWN key,
and then press
MENU/ENTER key again means that the new data has been saved and return to the menu.
If you do not want to save, please press
Exit/Cancel key to return to the menu.
Prompt:
●
Use the
shift keys to quickly switch to the parameter to be modified
.
●
The keypad is designed to be super anti-interference, allowing an outward lead distance of more than 3m.
Fault enquiry operations:
The soft starter can record 12 fault logs for easy viewing, in the “Ready” state, press
shift key to enter the
fault record menu. Check the fault logs by
UP key or
DOWN key. If you want to exit fault record
menu, please press
shift key to exit the menu.
