EMGA 859.715, Руководство пользователя

Страница: 9 / 37

9
5. KEY DESCRIPTIONS
KEYS FUNCTIONS
Set the zero point for all subsequent weighing. The display shows
zero.
Tare the scale. Stores the current weight in memory as a tare
value, subtracts the tare value from the weight and shows results.
This is the net weight.
A secondary function “
”, or “ Enter ” key when setting
parameters or other functions.
Set the limits for check weighing. Allow setting of either the low
limit or the high limit or both.
Secondary function “
Ż
”, is to move the active digit to the left when
setting values for parameters or other functions.
Enter the percent weighing function. Allows the weight to be seen
when parts counting.
Secondary function “
Ź ”, is to move the active digit to the right
when setting values for parameters or other functions.
Be used to select the functions of the scale. If the scale is in
weighing mode, it will select parts counting. Of it is not in weighing
mode it will return the user to weighing.
A secondary function “
Ÿ
”, increment the active digit when setting
values for parameters or other functions.
Print the results to a PC or a printer by using the optional RS-232
interface. It also adds the value to the accumulation memory if the
accumulation function is not automatic.
Press this key to enter into accumulation function. The display will
show Accumulation times and total weight.
Secondary function (Exit), is to return to normal operation when
the scale is in parameter setting mode.
Press this key to hold the display when an active thing is weighted.
Select weigh units (kg, g, oz, and lb)
A secondary function (Clear), is used to clear values when setting
values for parameters or other functions.
859715-25-35 en ma 2012-07