Document Part # 026-4275 Rev 0
Page 3 of 23
©2019 Emerson Climate Technologies Retail Solutions, Inc. This document may be photocopied for personal use.
Visit our website at http://www.emerson.com for the latest technical documentation and updates.
Activating the License of the Device
1. If connected remotely, use Terminal Mode to
enter the license.
2. From the E2 front panel (or via Terminal
Mode), log into the controller using
Level 4
credentials.
3. Press
,
, and
to go to the
Licensing
screen.
4. Press
, then enter the License Key issued
for the device. If entered correctly, the
message
License Feature Activated
will
appear on the screen.
Device Setup
Setting the Address on XM670K_50 using the
CX660 Keyboard
1. Press
+
at the same time for
five (5) seconds to open first-level
programming. The display will stop flashing
once it enters the programming mode.
2. Navigate through parameters by pressing
or
until
Adr
appears on the screen.
3. Press
and assign the corresponding
address for the device by pressing
or
. Press
to save changes.
4. To exit, press
+
or wait for a few
seconds without pressing any key and the
display will start flashing.
Figure 8 - User Login Screen
Figure 9 - Licensing Screen
Figure 10 - License Activated
Figure 11 - XM670K_50
