Failure to follow and read all instructions carefully
before installing or operating this control could cause
personal injury and/or property damage
Assemble tools required as shown below.
PREPARATIONS
1
WIRE CUTTER/STRIPPER
SPIRIT LEVEL OR PLUMB BOB AND LINE OPTIONAL—
THERMOSTAT MUST BE LEVEL TO WORK PROPERLY
FLAT BLADE SCREWDRIVER
HAND OR POWER
DRILL WITH 3/16 INCH
DRILL BIT, IF NEEDED
THERMOSTAT FEATURES
2
SUBBASE
(MODEL 1C26
ONLY)
BASE
COVER
ANTICIPAT OR
CAPTIVE SCREWS
MOUNTING SCREWS
Figure 1.
SUBBASE
(MODEL 1C26
ONLY)
BASE
COVER
ANTICIPAT OR
CAPTIVE SCREWS
Figure 1.
Adaptor Plate
(optional)