manualshive.com logo in svg

Emerson SI-DeviceNet, Руководство пользователя

Поделиться
Скачать
Emerson SI-DeviceNet Скачать руководство пользователя страница 74

74

SI-DeviceNet User Guide

Issue Number:  2

Event task:

 A special way to use a message or change of state to trigger a software 

routine.

IN data:

 Data that is returned from a slave device to the DeviceNet master.

Long word:

 A 32-bit data word that may be signed or unsigned.

Mapping:

 The process of linking DeviceNet values to parameters within the drive.

Master:

 The controlling device on the network, generally this will include programming 

features.

Network Loss Trip:

 A method to determine when a node has lost contact with the 

master.

Node:

 A device on the network. This may be either a device such as a drive or part of 

the network such as a repeater.

Non-Cyclic Data:

 Data that is requested or sent by the master as required. This is not 

sent on a regular basis and generally allows access to any parameter. This is useful for 
occasional changes or configuration purposes.

Object Dictionary:

 A collection of the objects that are supported by the product.

Poll rate: 

The rate at which cyclic data is sent and received on the network.

Response ID:

 The response code of the message received when using PPO4 word 

non-cyclic communication.

Scan rate:

 See Poll rate in this section.

Shielding:

 A connection to provide additional immunity to noise used on a network 

cable.

Segment:

 An electrically separate part of the network. Each segment requires correct 

termination to ensure reliable operation. Due to electrical limitations the maximum 
number of devices on a segment is limited to 32.

Slave:

 A device on the DeviceNet network such as a drive or sensor. A slave device will 

only respond to messages from a master.

Status word:

 A value that denotes the status of the drive. Each bit within the word will 

have a specific meaning.

Task ID:

 The code used to describe the purpose of a message using PPO 4 word non-

cyclic communication.

Termination: 

This is used at both ends of a network segment to prevent reflections and 

reduce noise.

Содержание SI-DeviceNet















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды