Emerson RTS FQ, Руководство по эксплуатации

Страница: 24 / 90

User Instructions
Part Number IOM – 87376-7 July 2016, Rev 1.
17
• Explosion Proof version: -20
o
C to +40
o
C (according to EN60079-0)
• Explosion Proof version with extended temperature range: -40
o
C to +60
o
C
CAUTION: OBSERVE OPERATION TEMPERATURE
The maximum operating temperature can also depend on further order specific components.
Please refer to the technical data sheets to confirm the as-delivered product specifications.
11.9 Delivery Condition of the Actuators
For each actuator, an inspection report is generated upon final inspection. In particular, this
comprises a full visual inspection, calibration of the torque measurement in connection with
an extensive run examination and a functional test of the micro controllers. These inspections
are conducted and documented according to the quality system and can be made available
if necessary. The basic setting of the end position must be performed after assembly on the
actuator.
CAUTION: OBSERVE COMMISSIONING INSTRUCTIONS
Commissioning instructions (see Section 16 ) must be strictly observed. During assembly of the
supplied valves at the factory, end postions are set and documented by attaching a label (see
Figure 14 ). During commissioning at the plant, these settings must be verified.
11.10 Information Tag
Each actuator is provided with a safety ag containing key information, which is attached to the
handwheel after final inspection. This safety tag also shows the internal commission registration
number (see Figure 15 ).
Figure 13 Safety Tag