Emerson RSTi-EP CPE200 Series, Быстрый старт

Страница: 11 / 38

8
RSTi-EP CPE200 Series Controllers Quick Start Guide GFK-3109B
RUN/STOP Switch
The EPXCPE models all feature a 3- position switch, labeled: “STOP,
RUN DIS, RUN EN” (Figure 1 and Figure 2).
Run/Stop Switch
Position
CPU Sweep Mode
RUN EN The CPU runs with I/O outputs enabled
RUN DIS The CPU runs with I/O outputs disabled
STOP The CPU is not allowed to go into RUN mode
Connectors and Ports
Ethernet Ports
The following tables indicate the default IP address for each
ethernet port.
Important
When storing a hardware configuration with a new IP address to the
PACSystems controller while connected via Ethernet, the connection will
succeed and then immediately disconnect because the PACSystems
controller is now using a different IP address than the programmer. The
user must enter the new IP address in Target Properties PAC Machine
Edition’s Inspector window before connecting and redownloading the
program for it to be stored in the user flash.