Emerson RSTi-EP CPE200 Series, Быстрый старт

Страница: 7 / 38

4
RSTi-EP CPE200 Series Controllers Quick Start Guide GFK-3109B
Displays and LED Indicators
Label Function Description/Notes
OK LED Multi-function PLC LED.
RUN LED Multi-function PLC LED.
REM IO LED
Remote IO state LED. PLC LED that will indicate
whether ALL or SOME PROFINET devices are
connected.
FORCE LED
PLC LED that indicates a “forced” value is present in
User Logic.
FLT/RDSD LED
PLC LED that will indicate a STOP-FAULT condition,
IP Conflict Detected, and also the RDSD state.
DUAL LAN LED
PLC LED that indicates EPXCPE205 LAN mode
configuration. This LED is not labeled on any other
EPXCPE model.
RUN EN RUN/STOP Switch PLC in Run Outputs Enabled.
RUN DIS RUN/STOP Switch PLC in Run Outputs Disabled.
STOP RUN/STOP Switch PLC in Stop.
PHY PRES
RDSD
Physical
Presence/RDSD
Button for Physical Presence actions (i.e. password
change), RDSD and reset to factory defaults.
RDSD – Single press to perform an upload.
RDSD – Double press to perform a download.
Is used to initiate Reset to Factory Default Settings.
µSD
Micro SD card Port for the micro SD card.
RS232 Serial Port
Port for serial communications. Only support RS-
232.
USB
RDSD
USB 2.0/RDSD
USB connection for RDSD, and potentially other
features in the future.
PORT X Ethernet Port Ethernet Ports. X = 1, 2, 3, or 4.
LNK Ethernet Port LED
LED that indicates Ethernet Link and Speed. Belongs
to the Ethernet Connector.
ACT Ethernet Port LED
LED that indicates Ethernet activity on the link.
Belongs to the Ethernet Connector.