Emerson PACSystems Versamax, Руководство пользователя

Страница: 3 / 53

User Manual Contents
GFK-2721B Sep 2019
Contents ii
3.2.4 Adding Power Supplies between Modules ............................................... 28
3.2.5 Configuring VersaMax Module Parameters .............................................. 28
3.2.6 Configuring Analog Modules that Have Jumpers ...................................... 30
3.3 Assigning IO-Device Names ............................................................................... 32
3.4 After the Configuration is Stored to the IO-Controller ........................................ 33
3.5 Output Operation .............................................................................................. 33
3.6 Clearing the IO-Controller Configuration ........................................................... 34
3.7 Replacing PROFINET Scanner Hardware ............................................................. 35
Chapter 4: Diagnostics .......................................................... 36
4.1 PROFINET Scanner Status and Control Data ....................................................... 36
4.1.1 Output Control Bits ................................................................................. 36
4.1.2 Input Status Bits ...................................................................................... 37
4.2 Error Handling ................................................................................................... 37
4.2.1 Fatal Error Handling ................................................................................. 38
4.2.2 PROFINET Alarms .................................................................................... 38
4.2.3 Clearing Faults on VersaMax Analog Modules .......................................... 41
4.2.4 PROFINET Module Loss, Add & Mismatch Faults ....................................... 42
4.3 Diagnostics for BEM003 PROFIBUS DP Networks ................................................ 43
Chapter 5: Maintenance Mode .............................................. 44
5.1 Entering Maintenance Mode and Performing Maintenance ................................ 45
5.2 Exiting Maintenance Mode and Restoring Operation ......................................... 45
5.3 Maintenance Mode Retentiveness through Power Cycle .................................... 46
Appendix A: PROFINET Specifications ...................................... 47
A.1 PROFINET Protocol Support ............................................................................... 47
A.2 Technical Data ................................................................................................... 47
A.3 Limitations ........................................................................................................ 48