24
•
E2 RX/BX/CX I&O Manual
User
This setting means the E2’s global data will
read (or be a “User” of) all values coming from the
network. This setting is for E2s that are not con-
nected to the sensor itself, but read the data that
comes from it.
If the application in this E2 will be using primary or
secondary inputs from other E2s, then set the priority
to “USER.”
Local Only
This setting specifies that the input to
the global data is read and sent only to within the E2
you are programming. Also, this means that this E2
will not read any Primary or Secondary providers
from the network.
If using this priority setting, you must enter board and
point settings.
Example: Setting Up an Outdoor Temperature Sen-
sor
1.
Press
(Global Data) and the Status screen
opens.
2.
Move the cursor to the Outdoor Air Temperature
(OAT) Mode, and then choose the priority by
scrolling with the
,
keys.
3.
Press the down arrow button once to the Board
and Point section and enter the board and point
locations for the sensor.
4.
Press
(BACK) to return to the Main Status
(Home) screen.
The Outdoor Air Temperature sensor is now set up as a
global device in the E2. Other global inputs can be set up
using the same method as above.
E2 is now ready to be programmed with applications.
3.11 Set Up Applications
From the Main Status (Home) screen, place the cursor
on the application you wish to view and press
(SETUP). You can also press
and select
(Setup)
from the Actions Menu to open the Setup screen for your
selected application.
3.11.1 Add/Delete an Application
Add an Application:
1.
Press the
key to open the Main Menu
screen.
2.
Select
(Add/Delete Application) to open the
Add/Delete Application menu.
3.
Select
to add an application.
4.
Choose an application by pressing
(LOOK
UP) to open the Option List Selection menu, and
choose the application you wish to add.
5.
Press
to place the application in the
Type
field.
6.
Select the number of applications you wish to add
in the
How many?
field.
7.
Press
to add.
8.
You are then asked if you would like to edit the
application now. Press
Y
(Yes) or
N
(No).
Delete an Application
:
1.
Press the
key to open the Main Menu
screen.
2.
Select
(Add/Delete Application) to open the
Add/Delete Application menu.
3.
Select
(Delete Application).
4.
Press
to delete the application if not dis-
played by default.
5.
If not displayed by default, choose the applica-
tion you wish to delete by selecting
(LOOK
UP). The Option List Selection menu opens.
Choose the application you wish to delete from
this list.
6.
Press
and the application appears in the
Type
field.
7.
Press
to delete the application.
8.
A dialog box opens asking if you are sure you
want to delete the application you have selected.
Press
Y
(Yes) or
N
(No).
