14
•
E2 RX/BX/CX I&O Manual
3.
Type in the user name (
Username
), and then
move to the next field (
Password
) by pressing
the right arrow button.
4.
Type in a password for the next user, then press
the right arrow button to advance to the next
field.
5.
The Auto Logout feature determines the maxi-
mum time user may be inactive before being
logged out. Enter the amount of time for the user
and press the right arrow button.
6.
Enter the appropriate access level for the user.
See
7.
Press
(BACK).
3.5.3
Deleting a User
To delete a user from the system:
1.
Move the cursor so that it is highlighting the
record to delete in the
Users
box at the bottom of
the screen, and press
(DELETE USER).
2.
A question box will appear to double check the
deletion of the current record. Press
if you are
sure about the deletion.
3.6
Set Up I/O Network
Figure 3-9
- Network Setup Menu
To start the setup on the I/O Network, access the Net-
work Setup menu:
1.
Press
to open the Main Menu.
2.
Press
(System Configuration).
3.
Press
(Network Setup).
The Network Setup menu displays four options:
• Network Summary
• Connected I/O Boards & Controllers
• Router Setup
• Controller Associations
For the total (E2) devices online or offline, status,
setup screens, changing board or controller names, config-
uring and commissioning devices, deleting a device, and
viewing detailed status screens of controllers, select
Net-
work Summary
.
For the number of I/O Network devices (16AIs,8ROs,
etc.) associated with each controller online and offline,
select
Connected I/O Boards & Controllers
.
To set up a router, select
Router Setup
. For more
information on routers and repeaters, refer to the
Router
and Repeater Installation Guide (P/N 026-1605)
.
For CC-100 circuit associations, select
Controller
Associations
.
3.6.1
Specify Number of Boards
Specify the number of boards from the Connected I/O
screen:
1.
Press
to open the Main Menu.
2.
Press
(System Configuration).
3.
Press
(Network Setup)
4.
Press
(Connected I/O Boards & Controllers)
Figure 3-10
- Connected I/O Screen (RX version)
Boards on the I/O Network
16AI Boards
Enter the number of 16AI analog
input boards on this E2’s I/O Network.
8RO Boards
Enter the number of 8RO relay output
boards on this E2’s I/O Network.
8DO Boards
Enter the number of 8DO digital out-
