Emerson Dixell XR20T, Руководство по эксплуатации

Страница: 20 / 41

1592040000 XR20-30-60-70T EN v1.5 2021.06.22 XR20-30-60-70T 20/41
PAr
Parity control: (no; odd; EvE) no=no parity control; odd=odd parity control; EvE=even parity
control
5.1.15 User Interface configuration parameters - Ui
b3C
Button 3 configuration: (nu; AUS; MAP) function linked to button 3. AUS =auxiliary output
control; MAP =parameter map change.
b1F Button 1 enabled in stand-by: (n; Y)
SCS
User interface timeout: (1 to 255 sec) timeout before coming back to Home Screen or to
Programming Menu
bS Sound Level: (0 to 5) select the sound level of the gestures
PSU
Password for protected level Pr2: (000 to 999) insert a value to protect all the parameters set
on the level Pr2 from modification
5.1.16 Information, read only parameters - inF
dP1 Probe P1 value visualization
dP2 Probe P2 value visualization
dP3 Probe P3 value visualization
dP4 Probe P4 value visualization
rSE Real regulation Set Point
FdY Firmware release date: day
FMt Firmware release date: month
FYr Firmware release date: year
rEL Firmware release: progressive number
SUb Firmware sub release: progressive number
Ptb Parameter map version
NOTE: some param
eters are not present in models XR30T and XR60T due to lack of the relevant I/O’s.
5.2 PARAMETER CONFIGURATION 1
Group Par. Description Value Protected U.O.M. Range
rEG SEt Set Point 3.0 Pr1 °C LS to US
rEG LS Minimum Set point -100.0 Pr1 °C
[-100.0°C to SET]
[-148.0°F to SET]
rEG US Maximum Set point 150.0 Pr1 °C
[SET to 150.0°C]
[SET to 302.0°F]
rEG HY
Compressor regulation differential in
normal mode
3.0 Pr1 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
rEG HYE
Compressor regulation differential in
energy saving mode
3.0 Pr1 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
rEG HY1
Second Compressor regulation differential
in normal mode
3.0 Pr2 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
rEG HYS
Second Compressor regulation differential
in energy saving mode
5.0 Pr2 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
rEG HYd
Deadband output regulation (oAx=db)
differential
2.0 Pr2 °C
[0.1°C to 25.0°C]
[0.1°F to 45.0°F]
rEG rAr
Delay between compressor and db output
(oAx=db) activation and vice versa
0 Pr2 min 0 to 255 min
rEG odS Output activation delay at start-up 0 Pr1 min 0 to 255 min
rEG AC Anti-short cycle delay 0 Pr1 min 0 to 50 min
rEG AC1
Anti-short cycle delay (2nd compressor)
0 Pr2 sec 0 to 255 sec
rEG 2CC
Activation mode for 2nd compressor:
HAF=step logic; FUL=delayed
FUL Pr2
rEG rCC
Enable compressor rotation
no Pr2
rEG MCo
Maximum time with compressor on
(0=disabled)
0 Pr2 min 0 to 255 min
rEG Cdd
Compressor selection during any defrost
cycle
2C Pr2
rEG rtr
Regulation percentage=F(P1; P2)
(100=P1; 0=P2)
100 Pr2 0 to 100