Emerson daniel 1500 series, Руководство пользователя

Страница: 71 / 104

Prerequisites
WARNING!
VOLTAGE HAZARD
Disconnect equipment from power before opening the LME and/or RME. Do not open them
while power is on and an explosive gas atmosphere is present.
Failure to comply may result in death or serious injury.
Procedure
1. Remove the security seal wire.
2. Remove the security latch using the 3 mm Allen key.
Important
The security latch prevents the removal of the LME cover in a flameproof environment.
3. Unscrew the end cap and remove it from the housing.
4. Unplug one or two ¾ -14 NPT ports (as required) and install the conduit (provided by
the customer) to the enclosure and tighten.
5. Install the electronics according to Wiring and cable connections . Consult with Daniel
if the preamplifier acquired is other than a dual channel preamplifier.
WARNING!
SHOCK AND EXPLOSION HAZARD
Verify that the LME and/or RME is grounded.
Failure to comply may cause death, serious injury and/or equipment damage.
6. Screw the end cap to the housing. Hand-tighten, only if required.
7. Install the security latch.
Installation procedure
User manual 61