background image

3

This Manual is Designed to Make it as Easy as Possible for You to

Assemble, Install, Operate and Maintain Your Ceiling Fan

Do not install or use fan if any part is
damaged or missing. Call Toll-Free:

1-800-654-3545

!

WARNING

This product is designed to use only
those parts supplied with this product
and/or any accessories designated
specifically for use with this product by
Emerson Electric Co. Substitution of
parts or accessories not designated for
use with this product by Emerson Electric
Co. could result in personal injury or
property damage.

!

WARNING

Tools Needed for Assembly

One Phillips head screwdriver
One wire stripper
One stepladder

Materials

Wiring, outlet box and box connectors
must be of type required by the local code.
The minimum wire shall be a 3-conductor
(2-wire with ground) of the following sizes:

Installed Wire Length

Wire Size A.W.G.

Up to 50 ft.

14

50-100 ft.

12

Before assembling your ceiling fan, refer
to section on proper method of wiring
your fan (Page 5). If you feel you do not
have enough wiring knowledge or
experience, have your fan installed by a
licensed electrician.

!

WARNING

Unpacking Instructions

For your convenience, check-off boxes are provided next to each step. As each
step is completed, place a check mark in the box. This will insure that all steps
have been completed and will be helpful in finding your place should you be
interrupted.

A. Ceiling Fan Assembly
B. One Ceiling Cover
C. One Medallion Set (2 pieces)
D. One Hanger Bracket
E. One SW46 Wall Control
F. One Loose Parts Bag Containing:

1. Seven #10-32 x .75” Oval

Head Screws

2. Four #8-32 x .25 Flat

Head Screws

3. Four Wire Connectors

1.

Open carton containing fan. Remove
top half of styrofoam unit. Remove
parts, placing all carton contents on a
soft protective surface to prevent
scratching the painted or plated
finishes, and check to see that you
have received the following parts:

Model No.: CF3400

B. CEILING 
COVER

C. MEDALLION 
SET (2)

E. SW46 WALL 
CONTROL

D. HANGER 
BRACKET

4

0

3

2

1

A. CEILING FAN 
ASSEMBLY

F. LOOSE 
PARTS BAG

NOTE: Place the parts from the loose
parts bags in a small container to keep
them from being lost. 

BP7386, CF3400 Corsair  11/25/09  6:20 AM  Page 3

Содержание CORSAIR 44"















Отзывы: