3. Ceiling Fan Assembly
(Continued)
8
ETL Model No.: CF880L
3.10
Separate, untwist and unkink the three 80” Motor
Leads.
Route the 80” Black, Blue and White Motor Leads
through the Downrod (Figure 8).
4.5" DOWNROD
THREE 80" MOTOR LEADS
(UNTWISTED)
Figure 8
3.8
Carefully rotate the partial assembled Ceiling Fan and
place gently into the styrofoam to compete the final
installation of the Fan.
3.9
Remove the Hanger Ball by loosening the Set Screw in
the Hanger Ball until the Ball falls freely down the
Downrod (Figure 7).
Remove the Pin from the Downrod, then remove the
Hanger Ball.
Retain the Pin and Hanger Ball for reinstallation in
Step 3.16.
NOTE: Do not loosen the Screw holding the Green
Ground Wire.
PHILLIPS HEAD SET SCREW (LOOSENED)
HANGER BALL
DOWNROD
PIN
GREEN GROUND WIRE
GREEN GROUND WIRE SCREW
Figure 7
