11
emersonfans.com
Please contact 1-800-654-3545 for further assistance
ETL Model No.: CF430
6. Final Assembly
6.1
Slide the fan blade through the blade slot in the
flywheel. (Figure 12).
Mount the fan blade to the fan housing using three
#8 - 32 x 11mm washer head blade screws (Figure 12).
NOTE: Take care not to scratch fan housing
assembly when installing blades.
Complete installation of the remaining three blades per
the above instructions.
#8 - 32 x 11mm WASHER HEAD
BLADE SCREWS (3 per blade)
BLADE SLOTS (4)
FAN BLADES (4)
Figure 12
6.2
Remove one of the three #6 - 32 x 3/8” truss head
screws from the motor housing (Figure 13). Retain the
screw for future installation. Loosen the other two
screws.
Place the light kit plate adapter onto the motor housing.
Rotate the cover to engage the two loosen screws and
tight the two loosened screws.
Reinstall the #6 - 32 x 3/8” truss head screw (previously
removed) into the light kit plate adapter to secure.
#6 - 32 x 3/8" TRUSS
HEAD BLADE SCREW
LIGHT KIT
PLATE
ADAPTER
Figure 13
6.3
Engage the fan motor assembly connector to the light
fixture assembly connector until you hear a snap
(Figure 14).
FAN MOTOR
ASSEMBLY
CONNECTOR
LIGHT FIXTURE
ASSEMBLY
CONNECTOR
Figure 14
To reduce the risk of personal injury, do not bend the
blades when installing, balancing the blades or
cleaning the fan. Do not insert foreign objects in
between rotating fan blades.
WARNING
!
BP7486 CF430 Highrise OM 12/13/13 10:35 AM Page 11
