Emerson ASTEC Helios Candeo AP6C75AA, Руководство по установке

Страница: 80 / 96

80 End of job routines and turnover
IM6C75AA P0914426 Standard 3.00 March 2001
6.3. Installing the top cover
The top cover (item 6 in Figure 6.4) is used to prevent any foreign objects from
falling into the frame and possibly causing short-circuits. The cover is a semi-
rigid plastic (UL94V0 flammability) with pre-punched holes for ventilation. Cut
cable access holes as required by removing the “webs” around the intended
cabling access points using side cutters, then install the cover using the hardware
supplied for that purpose (item 15 in Figure 6.4).
6.4. Installation of the optional cabinet look-alike covers and door
If the frame(s) of your AP6C75AA Helios Candeo power system is (are)
equipped with cabinet look-alike covers and door, install these as described in
Procedure 6.1 and as shown in Figure 6.4.
Note:
The door is reversible and can be mounted to open from right to left
or left to right. However, the handle itself is not reversible.
Procedure 6.1 – Installing the doorframe
Step Action
1 Using the appropriate hardware to secure these in place, install the top and
bottom door mounting angles (item 1).
2 Using the appropriate hardware to secure these in place, install the left and
right side skin panels (item 3).
3 Insert the top and bottom hinge-pins of the door (item 2) into the hinge-holes in
the top and bottom door mounting angles (left or right side as required).
4 Using the appropriate hardware to secure these in place, install the top and
bottom plastic plates (items 4 and 5).
5 Using the appropriate hardware to secure it in place, install the top auxiliary
bracket (item 7).
–end–