Emerson ASTEC Helios Candeo AP6C75AA, Руководство по установке

Страница: 31 / 96

Locating and erecting the cabinets 31
Helios Candeo Power System – AP6C75AA Installation Manual
Figure 3.7 – Alternate method of anchoring the rods to the sub-floor
Cantruss or Unistrut channels anchored to floor, then rods bolted to channels.
Specific requirements and procedures for the anchoring of power frames may be
supplied either by the job specifications, by the Customer or by the raised floor
manufacturer.
3.6. Securing adjacent frames
Adjacent frames are secured to each other using the interframe linking plate
(P0916605) shown in the following illustration. This plate is shipped with every
frame. Note that the lifting eyebolts and stiffening bar must be removed prior to
installing the plate. Note also that if top supports are used per section 3.8, the
installation of the plate will be part of it.
Figure 3.8 – Top view of the interframe linking plate
Figure 3.9 shows the typical method of securing adjacent frames to each other
with the interframe linking plate.