Emerson 810-3013, Инструкция по установке и эксплуатации

Страница: 7 / 36

MultiFlex 16 Input Board Overview of the MultiFlex Product Line • 1
1 Overview of the Multi-
Flex Product Line
The MultiFlex line of control system boards
provide a wide variety of input, output, and
smart control solutions, all of which are based on
a single universal hardware platform. The board
design uses flash-uploadable firmware and plug-
in expansion boards to configure the base plat-
form board and apply it for use as an input
board, relay output board, analog output board,
or a combination I/O board.
1.1. MultiFlex 16 Input Board
The MultiFlex 16 input board offers sixteen
combination analog/digital input points for use
by CPC Einstein and REFLECS control systems.
The MultiFlex 16 is designed to be 100% com-
patible with the previous generation of CPC
input boards (the 16AI), and may be used in ret-
rofits with no additional hardware or software
setup or upgrades.
Like the 16AI, the MultiFlex 16 communi-
cates with the site controller via an RS485 con-
nection to a REFLECS COM A&D network or
an Einstein I/O network. Dip switches on the
board set the network ID (board number) and
baud rate.
The board also provides both +5VDC and
+12VDC output voltage points for use in power-
ing transducers or other input devices that
require power.
Unlike the 16AI, the MultiFlex 16 has a
hand-held terminal interface, which may be used
by technicians to view the input voltage and
engineering unit values for each input point
without need of a voltmeter or front panel con-
troller display.
Table 1-1 shows the part number of the Mul-
tiFlex 16.
Figure 1-1 - MultiFlex 16 Input Board
1
2
3
4
5
6
7
8
LEGEND
General Status LED
Termination Resistance Jumpers (three)
I/O Network Connection Input Connections (16)
Input Dip Switches
1
2
3
4
AC Input Power Connection
Address and Baud Rate Dip Switch
5
6
7
8
Hand-Held Terminal Port
I/O Net Tx and Rx LEDS
9
10
Transducer Power Out
9
10
P/N Model Name Description
810-3013 MultiFlex 16 16 analog/digital in-
puts, no outputs
Table 1-1 - MultiFlex 16 and 8 Input Board Models