Instruction Manual
D103621X012
4320
January 2018
32
Figure 22. Field Communicator Menu Tree—Configure
Switch Response Alerts
1 States (ref):
2 Transition Alert
3 Transition Dwell Alert
4 Transition Dwell
5 Configure:
6 Enable 'In Transition'
7 Enable 'Transition Dwell'
6 Transition Dwell Threshold
Online
1 Overview
2 Configure
3 Service Tools
Configure
1
Guided Setup
2
Manual Setup
3 Alert Setup (see below)
4 Calibration (see below)
Manual Setup
1 Wireless
2 Device
3 Limit Switch Configuration
4 Mapping
5 Fault Behavior
6 Local User Interface
7 Power Module
8 Event Configuration
Identification
1 Tag
2 Long Tag
3 Date
4 Description
5 Message
6 Polling Address
Wireless
1 Network ID
2 Join Device to Network
3 Broadcast Information
Power Module
1 Power Module Type
2 Voltage
3 Power Module Date
4 Battery Life
5 Reset Module Data
Cycle Counter
1 States (ref):
2 Cycle Counter Alert
3 Accumulated Count
4 Reset Accumulated Count
5 Configure:
6 Enable Cycle Count Alert
7 Cycle Trip Point
2
2‐2‐1
2‐2
2‐2‐2
2‐2‐2-1
2‐2‐3
Guided Setup
1 Device Setup
2 Configure Alerts
3 Join Device to Network
4 Configure Publishing
2‐1
Alert Setup
1 Cycle Counter
2 Switch State Alerts
3 Switch Response Alerts
4 Controller Alerts
2‐3
Calibration
1 Calibration Date
2 Sensor Calibration
3 Output Assignment
Broadcast Information
1 Tailor Burst Configuration
2 Set all Burst Messages to Default
3 Hardware Triggering
4 Message 0
5 Message 1
6 Message 2
Mapping
1 Set to Defaults
2 Primary
3 2nd
4 3rd
5 4th
6 Warning Information
Local User Interface
1 Calibration Locked Out
2 Override Locked Out
3 Mode Change Locked Out
4 LUI language
Limit Switch Configuration
1 Valve Position
2 Switch State
3 Opened/High Trip Point
4 Closed/Low Trip Point
5 Deadband
6 Edit Parameters
2‐2‐4
2‐2‐7
2‐3-2
2‐3-1
NOTES:
1 ON/OFF CONTROL ONLY.
2 ITEM LABEL IS PROCESS (INSTEAD OF VALVE POSITION) WHEN PROCESS REPORTING (MONITORING OR SNAP-ACTING MODE ONLY).
3 ITEM LABEL IS LATCHING SWITCH (INSTEAD OF SWITCH STATE) WHEN OPERATING MODE IS LATCHING (MONITORING OR SNAP-ACTING MODE ONLY).
4 NOT AVAILABLE IN SNAP-ACTING MODE.
5 OVERRIDE LOCKED OUT AND MODE CHANGED LOCKED OUT ARE NOT VISIBLE WITH MONITORING OPTION.
6 WHEN ACTIVE THE 'NOT CALIBRATED ALERT' REPLACES CALIBRATION DATE.
7 MONITOR ONLY.
8 THE POWER MODULE MENU DOES NOT APPEAR WHEN THE EXTERNAL POWER OPTION IS INSTALLED.
Device
1 Identification
2 Structure
3 Device Variable Properties
4 Discrete Variable Properties
Structure
1 Snap Acting Control
2 Latching Mode
3 Application Mode
4 Configure Structure
5 Operational Options
6 Tracking Debounce
6
Count
2‐2‐2-2
Fault Behavior
1 Active Fault Conditions
2 Enable Fault Conditions
3 Fault Behavior Details
4 Mode
2‐2‐5
2‐2‐6
2
Configure
1 Guided Setup
2 Manual Setup
3
Alert Setup
4
Calibration
Switch State Alerts
1 States (ref):
2 Switch Latched
3 Opened/High Limit Tripped
4 Closed/Low Limit Tripped
5 Configure:
6 Enable 'Latched' Alert
7 Enable 'Opened/High' Alert
8 Enable 'Closed/Low' Alert
Controller Alerts
1 Mode Alerts
2 Tracking Alerts
3 Close Time Alerts
4 Open Time Alerts
2‐4
2‐3-3
2‐3-4
1
1
1
1
1
1
1
2
3
5
5
4
4
4
1
1
6
Device Variable Properties
1 Reporting Precision
2 Scaled Position Properties
Discrete Variable Properties
1 Switch State Properties
2 Set Point Properties
2‐2‐2-3
2‐2‐2-4
2‐2‐1-3
7
8
