6
INSTALLER/CONFIGURATION MENU
To enter the menu: Press the
Menu
touch key. Press and hold for 5 seconds the
Installer Config
touch key. This displays
screen reference #1 in the table below. Screen Reference numbers appear in top right corner of display. Press
to advance
to the next menu item or
to return to a previous menu item. Press or to change a menu item option. Shaded items are
not available if selected for Non-Programmable. Write the options selected in the "Option Selected" column of the menu.
Installer Note:
To default the programming, clock and Configuration Menu to the Factory Default Settings, press the
,
and SYSTEM keys simultaneously. The thermostat display will go blank for a few seconds, and then all segments will display
momentarily.
For heat pump systems, Configuration Menu items 1 and 3 must be set to match the heat pump system.
CONFIGURATION MENU
Screen
Reference
Number
SS1
MS2
HP1
HP2
Press
key
Displayed
Factory
(Default)
Press
or
to select from
listed options
Comments
Option
Selected
1
MS 2
HP 1, HP 2, SS 1
Selects Multi-Stage (MS2, No Heat Pump), Heat Pump 1
(HP1, 1 compressor), Heat Pump 2 (HP2, 2 compressor
or 2 speed compressor), or Single Stage.
2
(GAS)
ELE
GAS setting: furnace controls blower.
ELE setting: thermostat controls blower.
3
0b (0)
b
Selects Reversing Valve (This item is only to appear if HP1 or HP2
is selected above.)
4
Days,
(7) P
5
or
0
Programs per week. (7 days, 5+1+1 days or non-programmable)
5
(4) PS
2
Programs per day.
4 = Morning, Day, Evening, Night
2 = Day, Night
Not available if 4 is 0
6
Cool-Off-
Heat-Auto
Cool-Off-Heat, Heat Off,
Heat, Cool-Off, Auto Off
System switch configuration in non heat pump mode.
Cool-Off-Heat-
Em-Auto
Cool-Off-Heat-Em,
Off-Em-Auto
System switch configuration, heat pump mode.
7
(On)
E
OFF
Selects Energy Management Recovery. Not available if 4 is 0
8
(FA) Heat, Cr
SL
Selects Adjustable Anticipation, cycle rate, Heat
9
(FA) Cool, Cr
SL
Selects Adjustable Anticipation, cycle rate, Cool
10
(FA) Cr/AU, Em
SL
Selects Adjustable Anticipation, cycle rate auxiliary, (This item is
only to appear if HP1 or HP2 is selected above).
11
(OFF)
CL
On
Selects Compressor Lockout.
12
(On)
dL
OFF
Selects Continuous Display backlight.
13
0
(Temperature)
5, LO to 5, HI
Selects Adjustable Ambient Temperature Display [range -5 (LO) to
+5 (HI)].
14
°F
°C
Selects °F/°C Display (temperature units in Fahrenheit or Celsius).
15
(On)
b
OFF
Selects audible Beeper On/Off.
16
(On)
dS
OFF
Selects Daylight Saving Time calculation.
17
(On) Heat,
AS
OFF
Selects Automatic Schedule for comfort temperature Programming,
heat mode. Not available if 4 is 0
18
(On) Cool,
AS
OFF
Selects Automatic Schedule for comfort temperature Programming,
cool mode. Not available if 4 is 0
19
(OFF)
CS
On
Selects Cool Savings Feature On of Off.
20
CS
Cool Savings
(3)
1-2-3-4-5-6
Selects amount of Cool Savings adjustment.
21
(Off)
CO
On
Select Compressor Optimization (not available on earlier models)
22
(OFF) CA
On
Selects Comfort Alert Feature On or Off. (not available on earlier
models)
23
(99) Heat,
HL
62-98
TEMPERATURE LIMIT, HEAT (max. heat set point).
24
(45) Cool,
LL
46-82
TEMPERATURE LIMIT, COOL (min. cool set point).
25
OFF,
Keypad Lockout
L
(total),
P
(partial),
Temperature Limit
(limited temperature range)
Selects Keypad Lockout.
26
000
001-999
Selects Keypad Lockout Combination (active only if keypad Lockout
is selected).
27
(On) Heat, FS
OFF
Fast second stage of heat (not available if SS1 is selected above).
28
(On) Cool, FS
OFF
Fast second stage of cool (not available if SS1 or HP1 is selected
above).
29
Remote (OFF)
On
Remote temperature sensor, enable/disable.
30
Remote, In
Outdoor Remote
Remote temperature sensor (Indoor/Outdoor).
31
(On) LS
OFF
Local temp. Sensor enable/disable (only when Indoor Remote is
selected On).
32
(OFF) dF
On
Selects Dual Fuel feature On or OFF (this item appears if HP1 or
HP2 is selected above).
