background image

8

PROGRAMMING 

TROUBLESHOOTING 

Comfort Alert Codes

 

The Comfort Alert diagnostics product monitors the air 
conditioning outdoor systems with single phase Copeland 
Scroll compressors. Abnormal system and electrical 
conditions are indicated by flashing ALERT codes on the 
yellow LED on the Comfort Alert module. The flash codes are 
transmitted to the thermostat by the Comfort Alert Thermostat 
interface module. The Comfort Alert compatible thermostat 
displays 

“Call For Service” 

that flashes at the same rate as 

the yellow LED on the Comfort Alert module. 

Comfort Alert Yellow Alert Codes

1 Flash

Long run time

2 Flashs

System pressure trip

3 Flashs

Short cycling

4 Flashs

Locked rotor

5 Flashs

Open circuit

6 Flashs

Open start circuit

7 Flashs

Open run circuit

8 Flashs

Welded Contactor

9 Flashs

Low voltage

Planning Your Program – Important

The Heating and Cooling Program schedules below allow you 
to pencil in your own program times and temperatures.
The 1F85-0422 comes configured for 5/1/1 day programming 
and can also be configured for 5/2 day programming (see 
configuration section).
Factory settings are listed on Monday through Friday, Satur-
day and Sunday. If you are re-programming a 5/2 day sched-
ule, pencil in your own times and temperatures directly below 
the factory times and temperatures.

If you are re-programming a 5+1+1 fill in all lines with the 
times and temperatures you want.
Keep the following guidelines in mind when planning your 
program.
•  In Heating, lower temperatures will save energy.
•  In Cooling, higher temperatures will save energy.
•  If you plan on using Auto Changeover, do not program    

   the heating higher than the cooling.

Worksheet for Re-Programming 5/2 Day and 5+1+1 Day Program

Heating

Program

Wake Up

(Period 1)

Leave For Work

(Period 2)

Return Home

(Period 3)

Go To Bed

(Period 4)

Mon-Fri

6:00 AM 70°F 8:00 AM 62°F 5:00 PM 70°F 10:00 PM 62°F

Sat-Sun

or Sat

6:00 AM 70°F 8:00 AM 62°F 5:00 PM 70°F 10:00 PM 62°F

Sun

5+1+1 only

6:00 AM 70°F 8:00 AM 62°F 5:00 PM 70°F 10:00 PM 62°F

Cooling

Program

Wake Up

(Period 1)

Leave For Work

(Period 2)

Return Home

(Period 3)

Go To Bed

(Period 4)

Mon-Fri

6:00 AM 75°F 8:00 AM 83°F 5:00 PM 75°F 10:00 PM 78°F

Sat-Sun

or Sat

6:00 AM 75°F 8:00 AM 83°F 5:00 PM 75°F 10:00 PM 78°F

Sun

5+1+1 only

6:00 AM 75°F 8:00 AM 83°F 5:00 PM 75°F 10:00 PM 78°F

Содержание 1F83-0422













Отзывы: