EES-401 Series Ultrasonic Energy Meter
Revision: 3.0.1
Page 44 of 90
Alarm #2 High Value
Enter the alarm high value.
Both relevant alarms are turned on in Windows M78
and M79; any of the measured flow, which is higher
than the high value, will activate the alarm in the OCT
hardware or relay output signal.
Beeper Setup
Set up the beeper on-off state.
0.
No Signal
1.
Poor Signal
2.
Not Ready (No*R)
3.
Reverse Flow
4.
AO Over 100%
5.
FO Over 120%
6.
Alarm #1
7.
Alarm #2
8.
Batch Control
9.
POS Int Pulse
10.
NEG Int Pulse
11.
NET Int Pulse
12.
Energy Pulse
13.
ON/OFF viaRS232
14.
Fluid changed
15.
Key Stroking ON
16.
Not Using
OCT Output Setup
The following signal options are available:
0.
No Signal
1.
Poor Signal
2.
Not Ready (No*R)
3.
Reverse Flow
4.
AO Over 100%
5.
FO Over 120%
6.
Alarm #1
7.
Alarm #2
8.
Batch Control
9.
POS Int Pulse
10.
NEG Int Pulse
11.
NET Int Pulse
12.
Energy Pulse
13.
FO
14.
FO via RS-485
15.
ON/OFF via RS485
16.
Fluid changed
17.
Not Using
Alarm #2 High Value
14400.00 m3/h
BEEPER Setup [77
15. Key stroking ON
OCT Output Setup [78
13. FO