Emec LOTUS AIR 10, Руководство по эксплуатации, Страница: 4 / 44

4
PART ON THE DOSING PUMPS IN THE "LOTUS AIR" SYSTEM
The pump must only be used for dosing liquid products.
It should not be used in explosive atmospheres (EX).
It should not be used to dose flammable chemicals.
It should not be used with radioactive chemicals.
Use the pump only after installation.
Use the pump in accordance with the data and technical specifications on the label.
Do not modify or use differently from that indicated in the user manual.
Keep the pump protected from sun and rain. Avoid splashing water.
The power to the system must be immediately disconnected and the pump
disconnected from the electrical outlet during any emergency within the
environment where the pump is installed.
If you use particularly aggressive chemicals strictly comply with the regulations
concerning their use and storage.
Always comply with local safety regulations.
The manufacturer of the dosing pump cannot be held liable for damage to
persons or property caused by incorrect installation, improper or incorrect use
of the dosing pump!
Install the dosing pump so that it is accessible at all times for maintenance
purposes.
Do not block the dosing pump area!
The unit must be controlled by an external control system. Dosing must be
interrupted if there is no water.
Assistance and maintenance of the dosing pump and all its accessories must
always be performed by qualified personnel.
Before any installation and maintenance:
• carefully read the chemical characteristics of the product to be dosed and
refer to the Safety Data Sheet of the product;
• wear the most suitable PROTECTIVE EQUIPMENT;
• drain the connection hoses of the dosing pump;
• carefully wash the hoses that have been used with particularly aggressive
materials.
Attention
Additional notes