Emec LOTUS AIR 10, Руководство по эксплуатации, Страница: 33 / 44

33
COMMUNICATION (LOG & LOGBOOK)
This function, when enabled, allows to record and send to ERMES server all instrument activities (date, time, temperature,
levels, alarms, totalizers, outputs status) for a set period (EVERY) and starting from a certain time (TIME) .
Note: SET TIME AND DATE PRIOR TO ENABLE THE LOG. If not fed after 30 days the instrument will lose current date
and time.
TIME: log starting time (format 23h 59min)
EVERY: frequency of recording (format 23h 59min)
E.g.: To set the instrument to begin logging events starting from 16:00 every hour set TOME to 16h: 00 and EVERY of 1h: 00m
Note: To view on instrument’s display the archived logs select LOGBOOK
REACTION TIME TEST
This feature allows to perform a test of the permanence of liquid inside the reaction tank (1 to 20 minutes) for the specified
duration and for a single production cycle. Can be used to verify the correct functioning of the system.
WIFI Connection
Within Communication Menu choose “WIFI” to bring wireless sub-menu.To manually enter the WiFi Network highlight
and click on first line to the right side of the menu and choose cryptography type (WPA, WEP or OPEN). Otherwise
move cursor below to choose within an existing network. If network doesn’t apper move cursor on SCAN and click
on it. Wait until desired wireless network appears, then move wheel on it then click. Enter WEP / WPA / WPA2
password (if required) and wait until connection has been estabilished and WiFi signal strength appears. To obtain
a reliable connection be sure to install the controller within WiFi range. See your router features and installation
procedure for best results.
Note: if an existing network doesn’t appear at first scan please repeat scanning procedure after a while.
WiFi signal strength