14
Section 1. Getting Started
Clinical settings
There are six Clinical settings for easypod™:
•
Dose settings
•
Cartridge expiration
•
Connection
•
Injection settings
•
Dose log
•
PIN code
To change a Clinical setting:
1.
Select “Menu”.
2.
Use the “
” key to highlight “Clinical settings”
(14a)
.
3.
Select “Open”. The warning message “Changes
can affect treatment” will appear
(14b)
and easypod
will beep three times.
4.
Select “OK” to continue, or “Exit” to return to the
Menu. You will be asked for a
PIN code
, which must
be entered to change any Clinical setting.
5.
Use the “
” key and then press “OK” to enter the
initial PIN code “0000”
(14c)
. The “Clinical settings”
menu will open
(14d)
.
6.
Follow the instructions on pages 15–23 for the
Clinical setting you would like to change.
7.
Once your setting is changed, select “Back” and then “Exit” to return to the Welcome screen.
Information about Clinical settings
•
Clinical settings should be changed only under guidance from your healthcare provider.
•
The initial PIN code is “0000” and should be changed only by your healthcare provider.
•
“Connection” is not an active feature.
14a
14b
14c
14d
Menu
Comfort settings
Remove cartridge
Device settings
Clinical settings
Open
Exit
Warning
OK
Changes
can affect
treatment
!
Exit
PIN code
XXXX
OK
Back
Clinical settings
Dose settings
Injection settings
Cartridge expiration
Dose log
Change
Back