A
QLogic SANSurfer SANBlade Manager
A-3
Third-Party Software
SANSurfer Version
History
SANSurfer versions include:
◆
2.0.21 — Initial Release
The SANSurfer software is not multipath-aware, and as such may
misreport HBA targets that are configured in multipath. This does not
affect the use of the tool; however, it will accurately report targets only on
ports that own an active LUN0.
◆
2.0.25 — Added target persistent binding capability and display
correction for LUNs on non-owning SP. (This functionality is
supported by QLogic; all usage questions and support issues
should be directed to QLogic.)
SANSurfer 2.0.25 cannot be used to upgrade to BIOS 1.4x. Until a later
SANSurfer is available, you will need to use the procedure
Updating
Using a DOS Boot Diskette
on page 2-11 to perform this upgrade.
This version of SANSurfer may display HBA options under different
menu names than appear in the HBA
C
TRL
-Q
menu, as well as in
previous SANSurfer versions. All user-configurable options are still
accessible.
QLogic_Windows.book Page 3 Thursday, March 10, 2005 10:31 AM
