4
4-4
EMC Fibre Channel with QLogic HBAs in the Windows Environment
Installing and Configuring the QLogic QLA4010 iSCSI HBA (TOE)
Updating the HBA Driver in a Windows 2000 or Windows 2003
Host
On Windows 2000 and Windows 2003 systems where the QLogic
HBA is detected automatically or a driver already is installed, it
might be necessary to update the current driver to the latest
EMC-qualified driver as described in this section. The following pro-
cedure assumes that you have already copied the latest driver from
the QLogic CD-ROM or downloaded it from the QLogic website and
put it onto a diskette or temporary folder on the hard disk. Refer to
the release notes provided with the driver for information that might
be unique to new driver revisions.
To install the driver into a Windows 2000 or Windows 2003 host:
1. Boot the host (if necessary) with Windows 2000 or Windows 2003.
2. From the Windows taskbar, click
Start, Programs, Administrative
Tools, Computer Management
.
3. In the left pane of the
Computer Management
dialog, click the
Device Manager icon.
4. Double-click the SCSI & RAID Controllers icon.
5. Under
SCSI & RAID Controllers
, double-click the adapter you
wish to upgrade.
6. In the next dialog, click the
Driver
tab; then click
Update Driver
.
7. Follow the update wizard until you are given the choice to
Display a list of the unknown drivers for this device so that I can
choose a specific driver. Click the button next to this choice; then
click
Next
.
8. In the
Select a Drive
r dialog, click
Have Disk
.
9. Enter the path to the diskette containing the driver (A:\, for
example), or use the browse function to locate the driver; then
click
OK
.
10. Select the driver that is discovered, and click
Next
.
11. In the next dialog, click
Next
.
12. If prompted, click
Yes
to continue the installation.
13. Click
Finish
to complete the installation.
QLogic_Windows.book Page 4 Thursday, March 10, 2005 10:31 AM
