Unthrottle
Displays the percentage at which the CPU is currently running.
Press the selection button to set CPU speed to 100%.
Read-Only
Press the selection button to set node access to read-only.
Read-Write
Press the selection button to set node access to read-write.
UnitLED On
Press the selection button to turn on the unit LED.
UnitLED Off
Press the selection button to turn off the unit LED.
Shutdown menu
The
Shutdown
menu allows you to shut down or reboot the node. This menu also allows
you to shut down or reboot the entire cluster. Press the up or down navigation button to
cycle through the four shut down and reboot options, or to cancel out of the menu.
Press the selection button to confirm the command. You can press the left navigation
button to back out of this menu without shutting down or rebooting.
Update the install database
After all work is complete, update the install database.
Procedure
1. Browse to the
EMC Product Registration and Install base Maintenance
service portal,
at:
http://emc.force.com/createPSCcase
.
2. Select the
Product Registration and Install Base Maintenance
option.
3. To open the form, select the
IB Status Change
option.
4. Complete the form with the applicable information.
5. To submit the form, click
Submit
.
Where to go for support
Contact EMC Isilon Technical Support for any questions about EMC Isilon products.
Online Support
Live Chat
Create a Service Request
Telephone
Support
United States: 1-800-SVC-4EMC (800-782-4362)
Canada: 800-543-4782
Worldwide: +1-508-497-7901
For local phone numbers for a specific country, see
EMC Customer
Support Centers
.
Installation Guide
18
NL400
Installation Guide
