46
Serial/Ethernet/USB Communication (SCOM) Interface - MCC Commands
IND100084-22
MCC Commands List
NOTE: A char between the ' ' indicate an ASCII value. Example '1' = 0x31.
A complete HEX, ASCII, BIN and Character table overview are available in the APPENDIX chapter.
Some commands have footnotes, see references at the end of this table. "GEV2" = Series X Generation 2 (G2) models, "GEV1" = Series X Generation 1 (G1) models:
Reference Compatibility: https://www.hattelandtechnology.com/product-notifications/firmware-update-for-32-and-55-inch-products
Function
Data
Description
GEV2
GEV1
Differences
Brightness control
Important: Not to be confused with
"BRU" - User Brightness Control
command.
0x81,
nn | '+' | '-' | 'r' | 'R' | '?'
Set brightness = value / increment /
decrement / reset / query
Brightness
Range='0''0'~'2''5''5'
Default = '1''2''8'
Brightness
Range=‘0’’0’~’6''4'
Default = ‘3''2'
Value Range changed from 0-100 to 0-255
Contrast control
0x82,
'a' | 'A' , nn | '+' | '-' | 'r' | 'R' | '?'
Set contrast = value / increment /
decrement / reset / query
Contrast
Range='0''0'~'2''5''5'
Default = '1''2''8'
Contrast
Range=‘0’’0’~’6''4'
Default = ‘3''2'
Value Range changed from 0-100 to 0-255
Remove the option to configure all input source. All
individual input has own settings.
Saturation control
0x83,
nn | '+' | '-' | 'r' | 'R' | '?'
Set Saturation = value / increment /
decrement / reset / query
Saturation
Range='0''0'~'2''5''5'
Default = '1''2''8'
Saturation
Range=‘0’’0’~’6''4'
Default = ‘3''2'
Value Range changed from 0-100 to 0-255
Hue control
0x84,
nn | '+' | '-' | 'r' | 'R' | '?'
Set Hue = value / increment /
decrement / reset / query
Hue
Range='0''0'~'2''5''5'
Default = '1''2''8'
Hue
Range=‘0’’0’~’6''4'
Default = ‘3''2'
Value Range changed from 0-100 to 0-255
Manual Phase control
0x85,
nn | '+' | '-' | '?'
Set dot clock phase = value /
increment / decrement / query
Phase
Range='0''0'~'2''5''5'
Phase
Range=‘0’’0’~’3''F'
Default = ‘3''2'
Value Range changed from 0-100 to 0-255
Image H position
0x86,
nn | '+' |'-' | 'r' | 'R' | '?'
Set image Hpos = value / increment /
decrement / reset / query
Hpos
Range='0''0'~'2''5''5'
Default = '1''2''8'
Hpos
Range=‘0’’0’~’6''4'
Default = ‘3''2'
Value Range changed from 0-100 to 0-255
Image V position
0x87,
nn | '+' | '-' | 'r' | 'R' | '?'
Set image Vpos = value / increment /
decrement / reset / query
Vpos
Range='0''0'~'2''5''5'
Default = '1''2''8'
Vpos
Range=‘0’’0’~’6''4'
Default = ‘3''2'
Value Range changed from 0-100 to 0-255
Auto Source Select
0x88,
n | 'r' | 'R' | '?'
Set Auto Source Select = disable /
enable / reset / query
'0' - disable
'1' - enable (default)
‘0’ - disable
‘1’ - enable (default)
Same as GEV1
OSD mode
0x89,
n | 'r' | 'R' | '?'
Set OSD mode = full / simple / reset /
query
'0' - Advanced (default)
'1' - Basic
'2' - Service
"0" = Full (default)
"1" = Simple
Same as GEV1
Add new option of service menu
Sharpness
0x8A,
nn | '+' | '-' | 'r' | 'R' | '?'
Set sharpness = value / increment /
decrement / reset / query
Sharpness
Range='0''0'~'2''5''5'
Default = '1''2''8'
Sharpness
Max Range: "0"'0' to "F"'F'
Default: "0" "7"
Value Range changed from 0-15 to 0-255
Manual Frequency control
0x8B,
nn | '+' | '-' | '?'
Set dot clock frequency = value /
increment / decrement / query
Clock
Range='0''0'~'2''5''5'
Clock
Range ='0''0' to '6''4'
Value Range changed from 0-100 to 0-255
Graphic Scaling
0x8C,
n | 'r' | 'R' | '?'
Set image graphic scaling = value / reset
/ query
‘0’ - Fill Screen (default)
‘1’ - One To One
‘2’ - Fill to aspect ratio
‘0’ - Fill Screen (default)
‘1’ - 1:1
‘2’ - Fill to aspect ratio
Similar/Same as GEV1.
Содержание HATTELAND TECHNOLOGY X MMD G2 Series
Страница 56: ...56 This page left intentionally blank...
Страница 57: ...57 Appendixes...
Страница 68: ...Hatteland Technology AS www hattelandtechnology com Enterprise no NO974533146...