EMBRON HATTELAND TECHNOLOGY X MMD G2 Series, Техническое руководство

Страница: 34 / 68

34
Serial/Ethernet/USB Communication (SCOM) Interface
IND100084-18
"VER" - Read Specific Type
This command is used to read the specific Type segment in Type Number. The returned value is the three characters
from pos 8 to 10 in stored Type Number. If there is no type number stored, return 0 byte.
For example, if the type number is "HD55T22MVDMA1AAAAAAA", VER should return "MVD"
The purpose of defining this command is to be compatible with old SCOM command.
Example:
Read "Ver":
0x07 0xFF 0x56 0x45 0x52 0x00 0x0C
ACK Reply from unit:
0x06 0xFF 0x56 0x45 0x52 0x03 0x0A 0x4A 0x48 0x44 0x29
"FWV" - Read Firmware information
This command will be used to read various firmware versions.
The purpose of defining this command is to be compatible with old SCOM command.
Byte # 0 1 2 3 4 5 6 7 8
0x07 0xFF 0x46 0x57 0x56 0x01 IHCHK FW Type IDCHK
FW TYPE: Specify the firmware type.
Range: Valid values in table
Device Type Value Comment
Microcontroller Firmware 0x00 Same as SWI
Video Scaler 0x01 Same as SWV
Microcontroller Config File 0x02
Example:
Get Microcontroller Firmware :
0x07 0xFF 0x46 0x57 0x56 0x01 0x19 0x00 0xFF
ACK reply from unit: "00004"
0x06 0xFF 0x46 0x57 0x56 0x05 0x19 0x30 0x30 0x30 0x30
0x34 0x0B