EMBRON HATTELAND TECHNOLOGY X MMD G2 Series, Техническое руководство

Страница: 25 / 68

25
Serial/Ethernet/USB Communication (SCOM) Interface
IND100084-18
"ODM" - Outdoor Mode
This command shall set the GDC outdoor mode. The outdoor mode will add 5 second delay to the GDC buttons.
However this 5s press is not needed again if 5s does not elapse since last button usage (If one button has been held
for more than 5s, any button will respond instantly. If there is user absence for more than 5s ODM is activated again).
Byte # 0 1 2 3 4 5 6 7 8
0x07 0xFF 0x4F 0x44 0x4D 0x01 IHCHK OUT IDCHK
OUT: Describes the status of the OUT variable
Range: Valid levels in table:
0x00
Turn off the outdoor mode
0xFF
Turns on the outdoor mode
After unit reset the value is set to: Nothing is stored.
After microcontroller reset the value is set to: Nothing is stored.
Write:
Sets the outdoor mode to on or off.
Example:
Deactivate Outdoor Mode:
0x07 0xFF 0x4F 0x44 0x4D 0x01 0x18 0x00 0xFF
ACK reply from unit:
0x06 0xFF 0x4F 0x44 0x4D 0x01 0x19 0x00 0xFF