EMBRON Hatteland Technology Series 1, Руководство пользователя

Страница: 35 / 62

35 User Controls
IND100064-34
OSD Menu Functions
Display / Setup / User Settings / Auto Source Select
Enable/disable the automatic detection and selection of any signal input and show it full screen. If you
have a external unit that switches between several other external signal inputs of different signal origins,
this function will be helpful and switch to the signal that appears to be valid since the last detection was
made. If for instance a Composite Video Signal was terminated, the display controller would automatically
scan the other available signal inputs and show that signal full screen instead. If that too is lost, it will
continue to scan the other signal inputs. If no signal inputs were in the end found to be valid, the unit would
eventually only show a black image and automatically power off (standby) due to inactivity (idle) in the
signal streams. Default is set to Disable (Off).
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.
Display / Setup / User Settings / Gamma / x.x
Function only available in “Full” menu mode.
Adjust the overall gamma intensity. You can choose 1.0 (default), 1.6 or 2.0. Higher values will give a much
more brighter/washed out picture even in the darkest areas, i.e. black becomes faint grey. This affects the
whole panel, and all applies to all signal inputs and window overlays (PIP/PBP) inlcuding the OSD Menu
overlay. This will be independent of the actual brightness/contrast adjustment done by the front user
controls like potmeters or buttons.
● When selected, a box icon ( ▀ ) will indicate that the selected function has been activated.
Display / Setup / User Settings / Splash Screen
Function only available in “Full” menu mode.
Enable/disable the Splash Screen logo upon power on for the unit and while the display controller is
initalizing. It will be gone as soon as the signal input appear on screen. This is by factory default shown as
manufacturer’s brand logo (HATTELAND®). This can also be customized to show customer logo.
Display / Setup / Load Default / Factory Default
This function will reset everything to factory default settings. It will not revert back to a possible set of saved
user defaults stored in the display controller software. All signal inputs and image adjustments will be reset.
This function can be used in cases where you suspect a faulty or unsuitable configuration of the display is
present. It can also be used in trouble-shooting situations to determine that the display are not or are the
reason for a faulty or undesirable operation. The problem may be from external equipment.
● Press the right (►) button to activate. A confirmation requester will appear. Use +/- to confirm.
Display / Setup / Load Default / DDC Setup / Default DDC
Function only available in “Full” menu mode.
This function will detect the TFT panel specifications (EDID data) and update it via the DDC (Display Data
Channel) to the display controller. It is to make sure the TFT panel’s specifications can be detected
succesfully by the display controller software. This can be used in trouble-shooting situations to determine
that the display are not or are the reason for a faulty or undesirable operation. The problem may be from
external equipment.
● Press the right (►) button to activate. A confirmation requester will appear. Use
+/-
to confirm.